NH 1A

over HAMPTON RIVER

0.1 MI FROM SEABROOK TL, Rockingham County, New Hampshire

Condition

Poor

Year Built

1949

Daily Traffic

9,293

Length

120 ft

About This Bridge

NH 1A carries traffic over HAMPTON RIVER in Rockingham County, New Hampshire. Built in 1949, this structure is 77 years old, making it a historic structure that has served the community for generations. The bridge features steel construction with a movable - bascule design, a combination chosen by engineers to meet the specific requirements of this crossing.

Approximately 9,293 vehicles cross this bridge daily, indicating lower traffic volumes common for local roads and rural routes. While traffic is lighter, these bridges still serve essential community transportation needs. Commercial trucks account for 7% of all crossings. This proportion of commercial traffic is typical for this roadway classification and is factored into the bridge's design load ratings.

The bridge is currently rated in poor condition based on federal inspection criteria established by the Federal Highway Administration. It is classified as structurally deficient, meaning one or more components have received a rating of 4 or below on the 0-9 scale. This designation indicates significant deterioration that warrants attention, though the bridge remains safe for travel within its posted limits. Structurally deficient does not mean unsafe—rather, it signals that repairs or replacement should be prioritized in transportation planning. With a total length of 120 feet, this structure falls within the typical range requiring standard inspection procedures conducted by certified bridge inspectors.

Steel bridges provide high strength-to-weight ratios, making them suitable for longer spans. However, they require ongoing protection against corrosion through painting or weathering steel designs. Inspectors pay close attention to connection points, fatigue cracking, and coating condition.

Federal law requires that all highway bridges be inspected at least every 24 months by qualified inspectors following the National Bridge Inspection Standards (NBIS). Some bridges with known issues or unusual characteristics may be inspected more frequently. Inspection data is reported to the National Bridge Inventory, a database maintained by the Federal Highway Administration that tracks the condition of all public highway bridges in the United States. This bridge data is sourced from that federal database and reflects the most recent available inspection results.

Condition Ratings

Structurally Deficient

This bridge has one or more component ratings of 4 or below, indicating significant deterioration that requires attention. The bridge remains safe for travel but may have load restrictions.

7

Deck Condition

Good

4

Superstructure

Poor

6

Substructure

Satisfactory

6

Channel & Protection

Satisfactory

4

Lowest Rating

Determines condition category

NBI condition ratings range from 0 (failed) to 9 (excellent). Ratings of 4 or below are considered poor. The overall condition category is determined by the lowest individual component rating.

The superstructure rating of 4 shows advanced deterioration in beams or girders.

For a structure built in 1949, the current condition reflects the cumulative effects of age, traffic, and environmental exposure. If this bridge were closed, traffic would face a detour of approximately 10 miles, underscoring the importance of maintaining this crossing.

Bridge Details

Steel is the primary structural material, which influences maintenance requirements and expected lifespan. The movable - bascule design was selected based on span requirements, load capacity needs, and site conditions at the time of construction. Maintenance responsibility falls to State Highway Agency.

Construction

Year Built1949
Year Reconstructed1984
MaterialSteel
Design TypeMovable - Bascule
OwnerState Highway Agency

Dimensions

Total Length120 ft (36.5 m)
Max Span9 ft (2.9 m)
Deck Width3 ft
Deck Area3,728 sq ft

Span dimensions affect structural design choices and load distribution. The deck area of 3,728 sq ft determines surface maintenance scope.

Classification

Route TypeState Highway
Route Number1A
Lanes On Bridge2
Lanes Under Bridge

Status

Toll BridgeNo
Historical SignificanceEligible for NRHP
Scour Critical3
Detour Length10 mi (16 km)

Traffic Data

Traffic volume data helps engineers assess bridge wear patterns and plan maintenance schedules. Average Daily Traffic (ADT) counts are updated periodically and represent typical weekday usage.

9,293

Avg Daily Traffic (2022)

Vehicles per day crossing this bridge

7%

Truck Traffic

Commercial vehicle percentage

13,753

Projected Future ADT

Estimated future demand

This bridge carries approximately 9,293 vehicles per day, translating to roughly 3,391,945 crossings annually. Lower traffic volumes generally result in less structural wear over time.

Commercial trucks comprise 7% of traffic. Heavy vehicles cause disproportionate wear—a single fully loaded truck can have the impact of thousands of passenger cars on bridge deck surfaces.

Traffic projections estimate future volumes of 13,753 vehicles daily, a 48% increase from current levels. These projections inform capacity planning and potential upgrade requirements.

Load Ratings

Load ratings determine what weight this bridge can safely support. These values are critical for routing heavy vehicles and issuing overweight permits.

Operating Rating

3.5 tons

Maximum allowable load for special permits

Inventory Rating

2.1 tons

Load level for normal traffic

The operating rating of 3.5 tons represents the absolute maximum load this bridge can carry under controlled conditions with special permits. The inventory rating of 2.1 tons is the safe load limit for everyday traffic without restrictions. These relatively low ratings may result in posted weight limits or route restrictions for heavy vehicles.

5-Year Condition Trend

Declining

Condition has declined by 1.0 rating points since 2020

Status Changes

  • Entered poor condition in 2021
  • Became structurally deficient in 2021

Data: 2020-2024 FHWA National Bridge Inventory

Location

Loading map...

44.191389, -72.439444

Identification

Structure Number011102350002500
NBI IDNH-011102350002500
State FIPS33
County FIPS015

Explore More

Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024

Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.

“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.

This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.

NH 1A over HAMPTON RIVER | New Hampshire