I 93 RAMP MW
over COMB I90&RMP LL KK&AMTK
.5 M N OF I90, Suffolk County, Massachusetts
Condition
FairYear Built
2002
Daily Traffic
2,521
Length
55 ft
About This Bridge
I 93 RAMP MW carries traffic over COMB I90&RMP LL KK&AMTK in Suffolk County, Massachusetts. Built in 2002, this structure is 24 years old, representing modern engineering and construction standards. The bridge features prestressed concrete continuous construction with a segmental box girder design, a combination chosen by engineers to meet the specific requirements of this crossing.
Approximately 2,521 vehicles cross this bridge daily, indicating lower traffic volumes common for local roads and rural routes. While traffic is lighter, these bridges still serve essential community transportation needs. Commercial trucks account for 22% of all crossings. This heavy commercial usage significantly impacts structural wear, as a single fully-loaded truck can cause as much deck wear as thousands of passenger vehicles. Transportation planners factor this into maintenance scheduling and budget allocation.
The bridge is currently rated in fair condition based on federal inspection criteria established by the Federal Highway Administration. The structure meets current safety standards for its designated use and load capacity. With a total length of 55 feet, this is a shorter span typical of local road crossings, often carrying traffic over small streams, drainage channels, or other roadways.
The construction materials used in this bridge were selected based on engineering requirements, cost considerations, and local conditions at the time of construction.
Federal law requires that all highway bridges be inspected at least every 24 months by qualified inspectors following the National Bridge Inspection Standards (NBIS). Some bridges with known issues or unusual characteristics may be inspected more frequently. Inspection data is reported to the National Bridge Inventory, a database maintained by the Federal Highway Administration that tracks the condition of all public highway bridges in the United States. This bridge data is sourced from that federal database and reflects the most recent available inspection results.
Condition Ratings
Deck Condition
Satisfactory
Superstructure
Satisfactory
Substructure
Good
Channel & Protection
N/A
Lowest Rating
Determines condition category
NBI condition ratings range from 0 (failed) to 9 (excellent). Ratings of 4 or below are considered poor. The overall condition category is determined by the lowest individual component rating.
The fair condition rating of 6 indicates satisfactory condition with minor section loss or deterioration.
For a structure built in 2002, this condition level is expected given the bridge's age and usage patterns.
Bridge Details
Prestressed Concrete Continuous is the primary structural material, which influences maintenance requirements and expected lifespan. The segmental box girder design was selected based on span requirements, load capacity needs, and site conditions at the time of construction. Maintenance responsibility falls to State Highway Agency.
Construction
Dimensions
Span dimensions affect structural design choices and load distribution. The deck area of 1,254 sq ft determines surface maintenance scope.
Classification
Status
Traffic Data
Traffic volume data helps engineers assess bridge wear patterns and plan maintenance schedules. Average Daily Traffic (ADT) counts are updated periodically and represent typical weekday usage.
2,521
Avg Daily Traffic (2018)
Vehicles per day crossing this bridge
22%
Truck Traffic
Commercial vehicle percentage
—
Projected Future ADT
Estimated future demand
This bridge carries approximately 2,521 vehicles per day, translating to roughly 920,165 crossings annually. Lower traffic volumes generally result in less structural wear over time.
Commercial trucks comprise 22% of traffic. Heavy vehicles cause disproportionate wear—a single fully loaded truck can have the impact of thousands of passenger cars on bridge deck surfaces. This high percentage of truck traffic may accelerate deterioration of deck surfaces and structural components.
Load Ratings
Load ratings determine what weight this bridge can safely support. These values are critical for routing heavy vehicles and issuing overweight permits.
Operating Rating
8.0 tons
Maximum allowable load for special permits
Inventory Rating
4.8 tons
Load level for normal traffic
The operating rating of 8.0 tons represents the absolute maximum load this bridge can carry under controlled conditions with special permits. The inventory rating of 4.8 tons is the safe load limit for everyday traffic without restrictions. These relatively low ratings may result in posted weight limits or route restrictions for heavy vehicles.
5-Year Condition Trend
↓DecliningCondition has declined by 1.0 rating points since 2020
Data: 2020-2024 FHWA National Bridge Inventory
Location
Loading map...
43.605556, -72.028333
Identification
Explore More
Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024
Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.
“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.
This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.