BU 287 P

over VILLAGE CREEK

0.45 MI SE OF IH 20, Tarrant County, Texas

Condition

Good

Year Built

1998

Daily Traffic

20,978

Length

60 ft

About This Bridge

BU 287 P carries traffic over VILLAGE CREEK in Tarrant County, Texas. Built in 1998, this structure is 28 years old, built during a period of significant highway expansion. The bridge features prestressed concrete construction with a stringer/multi-beam or girder design, a combination chosen by engineers to meet the specific requirements of this crossing.

Approximately 20,978 vehicles cross this bridge daily, representing moderate traffic volumes typical of important regional connectors. This level of usage requires regular monitoring to ensure continued safe operation.

The bridge is currently rated in good condition based on federal inspection criteria established by the Federal Highway Administration. The structure meets current safety standards for its designated use and load capacity. With a total length of 60 feet, this is a shorter span typical of local road crossings, often carrying traffic over small streams, drainage channels, or other roadways.

Concrete bridges offer excellent durability and relatively low maintenance requirements. They resist corrosion well but can develop cracking over time, particularly in regions with freeze-thaw cycles or heavy use of deicing chemicals. Regular inspection focuses on detecting cracks, spalling, and reinforcement corrosion.

Federal law requires that all highway bridges be inspected at least every 24 months by qualified inspectors following the National Bridge Inspection Standards (NBIS). Some bridges with known issues or unusual characteristics may be inspected more frequently. Inspection data is reported to the National Bridge Inventory, a database maintained by the Federal Highway Administration that tracks the condition of all public highway bridges in the United States. This bridge data is sourced from that federal database and reflects the most recent available inspection results.

Condition Ratings

7

Deck Condition

Good

7

Superstructure

Good

7

Substructure

Good

6

Channel & Protection

Satisfactory

7

Lowest Rating

Determines condition category

NBI condition ratings range from 0 (failed) to 9 (excellent). Ratings of 4 or below are considered poor. The overall condition category is determined by the lowest individual component rating.

With a lowest rating of 7, this bridge demonstrates good condition meeting all safety standards.

For a structure built in 1998, maintaining good condition demonstrates effective maintenance practices.

Bridge Details

Prestressed Concrete is the primary structural material, which influences maintenance requirements and expected lifespan. The stringer/multi-beam or girder design was selected based on span requirements, load capacity needs, and site conditions at the time of construction. Maintenance responsibility falls to State Highway Agency.

Construction

Year Built1998
MaterialPrestressed Concrete
Design TypeStringer/Multi-beam or Girder
OwnerState Highway Agency

Dimensions

Total Length60 ft (18.4 m)
Max Span7 ft (2.3 m)
Deck Width10 ft
Deck Area5,606 sq ft

Span dimensions affect structural design choices and load distribution. The deck area of 5,606 sq ft determines surface maintenance scope.

Classification

Route TypeState Highway
Route Number287
Lanes On Bridge5
Lanes Under Bridge

Status

Toll BridgeNo
Historical SignificanceNot eligible
Scour Critical8
Detour Length6 mi (10 km)

Traffic Data

Traffic volume data helps engineers assess bridge wear patterns and plan maintenance schedules. Average Daily Traffic (ADT) counts are updated periodically and represent typical weekday usage.

20,978

Avg Daily Traffic (2020)

Vehicles per day crossing this bridge

Truck Traffic

Commercial vehicle percentage

16,930

Projected Future ADT

Estimated future demand

This bridge carries approximately 20,978 vehicles per day, translating to roughly 7,656,970 crossings annually. This moderate traffic level is typical for regional connectors.

Traffic projections estimate future volumes of 16,930 vehicles daily, a decrease from current levels. These projections inform capacity planning and potential upgrade requirements.

Load Ratings

Load ratings determine what weight this bridge can safely support. These values are critical for routing heavy vehicles and issuing overweight permits.

Operating Rating

5.4 tons

Maximum allowable load for special permits

Inventory Rating

3.3 tons

Load level for normal traffic

The operating rating of 5.4 tons represents the absolute maximum load this bridge can carry under controlled conditions with special permits. The inventory rating of 3.3 tons is the safe load limit for everyday traffic without restrictions. These relatively low ratings may result in posted weight limits or route restrictions for heavy vehicles.

5-Year Condition Trend

Stable

Condition has remained relatively stable since 2020

Data: 2020-2024 FHWA National Bridge Inventory

Location

Loading map...

33.689722, -97.505556

Identification

Structure Number022200017202187
NBI IDTX-022200017202187
State FIPS48
County FIPS439

Explore More

Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024

Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.

“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.

This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.

BU 287 P over VILLAGE CREEK | Texas