NFA A542
over BLOWING SPRINGS
10 M WEST OF CENTERVILLE, Hickman County, Tennessee
Condition
PoorYear Built
1960
Daily Traffic
140
Length
25 ft
About This Bridge
NFA A542 carries traffic over BLOWING SPRINGS in Hickman County, Tennessee. Built in 1960, this structure is 66 years old. The bridge features concrete continuous construction with a culvert design.
The bridge is currently rated in poor condition based on federal inspection criteria. Its lowest component rating is 3 on the 0-9 federal scale. It is classified as structurally deficient, meaning one or more components have received a rating of 4 or below. This designation indicates significant deterioration that warrants attention, though the bridge remains safe for travel within its posted limits.
Condition Summary
Structurally Deficient
This bridge has one or more component ratings of 4 or below, indicating significant deterioration that requires attention. The bridge remains safe for travel but may have load restrictions.
Lowest Rating
Determines condition category
NBI condition ratings range from 0 (failed) to 9 (excellent). The overall condition category is determined by the lowest individual component rating.
Bridge Details
Construction
Dimensions
Limited Detail Available
This is a shorter bridge (25 ft). Detailed component-level inspection data, load ratings, traffic projections, and historical trend analysis are available for bridges 50 feet and longer. Basic condition and identification data is shown above from the National Bridge Inventory.
Location
Loading map...
36.188333, -87.728611
Identification
Explore More
Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024
Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.
“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.
This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.