TWP 804
over S BRANCH OF ROARING CR
E. OF ELYSBURG, Northumberland County, Pennsylvania
Condition
PoorYear Built
1852
Daily Traffic
150
Length
6 ft
About This Bridge
TWP 804 carries traffic over S BRANCH OF ROARING CR in Northumberland County, Pennsylvania. Built in 1852, this structure is 174 years old, making it a historic structure that has served the community for generations. The bridge features wood or timber construction with a truss - thru design, a combination chosen by engineers to meet the specific requirements of this crossing.
Approximately 150 vehicles cross this bridge daily, indicating lower traffic volumes common for local roads and rural routes. While traffic is lighter, these bridges still serve essential community transportation needs.
The bridge is currently rated in poor condition based on federal inspection criteria established by the Federal Highway Administration. It is classified as structurally deficient, meaning one or more components have received a rating of 4 or below on the 0-9 scale. This designation indicates significant deterioration that warrants attention, though the bridge remains safe for travel within its posted limits. Structurally deficient does not mean unsafe—rather, it signals that repairs or replacement should be prioritized in transportation planning. With a total length of 6 feet, this is a shorter span typical of local road crossings, often carrying traffic over small streams, drainage channels, or other roadways.
The construction materials used in this bridge were selected based on engineering requirements, cost considerations, and local conditions at the time of construction.
Federal law requires that all highway bridges be inspected at least every 24 months by qualified inspectors following the National Bridge Inspection Standards (NBIS). Some bridges with known issues or unusual characteristics may be inspected more frequently. Inspection data is reported to the National Bridge Inventory, a database maintained by the Federal Highway Administration that tracks the condition of all public highway bridges in the United States. This bridge data is sourced from that federal database and reflects the most recent available inspection results.
Condition Ratings
Structurally Deficient
This bridge has one or more component ratings of 4 or below, indicating significant deterioration that requires attention. The bridge remains safe for travel but may have load restrictions.
Deck Condition
Fair
Superstructure
Poor
Substructure
Fair
Channel & Protection
Fair
Lowest Rating
Determines condition category
NBI condition ratings range from 0 (failed) to 9 (excellent). Ratings of 4 or below are considered poor. The overall condition category is determined by the lowest individual component rating.
The superstructure rating of 4 shows advanced deterioration in beams or girders.
For a structure built in 1852, the current condition reflects the cumulative effects of age, traffic, and environmental exposure.
Bridge Details
Wood or Timber is the primary structural material, which influences maintenance requirements and expected lifespan. The truss - thru design was selected based on span requirements, load capacity needs, and site conditions at the time of construction. Maintenance responsibility falls to County Highway Agency.
Construction
Dimensions
Span dimensions affect structural design choices and load distribution. The deck area of 68 sq ft determines surface maintenance scope.
Classification
Status
Traffic Data
Traffic volume data helps engineers assess bridge wear patterns and plan maintenance schedules. Average Daily Traffic (ADT) counts are updated periodically and represent typical weekday usage.
150
Avg Daily Traffic (2018)
Vehicles per day crossing this bridge
—
Truck Traffic
Commercial vehicle percentage
271
Projected Future ADT
Estimated future demand
This bridge carries approximately 150 vehicles per day, translating to roughly 54,750 crossings annually. Lower traffic volumes generally result in less structural wear over time.
Traffic projections estimate future volumes of 271 vehicles daily, a 81% increase from current levels. These projections inform capacity planning and potential upgrade requirements.
Load Ratings
Load ratings determine what weight this bridge can safely support. These values are critical for routing heavy vehicles and issuing overweight permits.
Operating Rating
0.8 tons
Maximum allowable load for special permits
Inventory Rating
0.5 tons
Load level for normal traffic
The operating rating of 0.8 tons represents the absolute maximum load this bridge can carry under controlled conditions with special permits. The inventory rating of 0.5 tons is the safe load limit for everyday traffic without restrictions. These relatively low ratings may result in posted weight limits or route restrictions for heavy vehicles.
5-Year Condition Trend
→StableCondition has remained relatively stable since 2020
Status Changes
- Exited poor condition in 2021
- No longer structurally deficient as of 2021
- Entered poor condition in 2023
- Became structurally deficient in 2023
Data: 2020-2024 FHWA National Bridge Inventory
Location
Loading map...
40.938333, -77.310000
Identification
Explore More
Data Source: Federal Highway Administration (FHWA) National Bridge Inventory 2024
Bridge inspection data is typically updated every 24 months. Conditions may have changed since the last inspection.
“Structurally deficient” does not mean a bridge is unsafe or likely to collapse. It indicates that one or more key structural elements are in poor or worse condition. Bridges are inspected regularly and may have load restrictions in place.
This data is for informational purposes only and should not be used for route clearance or vehicle weight decisions.